Micro hardness tester

Equipment model
Shimadzu Dynamic Ultra-Hardness Tester DUH-211S
Made in
Japan
Use for
  • Effective instrument for performing surface hardness measurements on metals, plastics, rubbers, ceramics, and many other materials.
  • The instrument measures dynamic indentation depth and permit measurement of very thin films and surface (treatment) layers.
Technical parameters
  • Test Force Range: Full scale of 0.1 to 1.961 mN;
  • Test Force Accuracy: ± 19.6 μN or ± 1 % of displayed test force, whichever is greater;
  • Measurement Range: 0 to 10 μm;
  • Minimum Measurement Increment 0.0001 μm;
  • Total Magnification (microscope) – x500;
  • Area of Specimen Stage – Approx. 125 (W) x 125 (L) mm;
  • Vertical Distance – Approx. 60 mm;
  • Stage Movement Range – 25 mm in both X and Y directions;
  • Test Modes: Load-Hold Test, Load-Unload Test, Cyclic Test, Depth Setting Test, Depth Setting Load-Unload Test, Step Load Test, Step Load-Unload Test.
Inquire about the product