Plasma technologies and diagnostics

Optical spectrometer

The determination of flames and plasma flow emission spectra and elemental composition using an optical spectrometer.

The formation of electrode coatings

The formation and study of electrode coatings for energy generation, accumulation and storage facilities.

Ceramic fiber formation

The melting of ceramic materials and synthesis, application and study of high-temperature ceramic fiber for thermal insulation, fine filter and catalyst production.

Reduced-pressure plasma technology

The development, research and application of atmospheric, reduced and low-pressure plasma technology.

Water vapor plasma technology

The employment of water vapor and other gases plasma for biomass and solid fuel conversion, neutralization of hazardous materials and etc.

The formation of catalytic, tribological and protective coatings

The catalytic, tribological and protective coatings on various surfaces formed in plasma environment, the study of their properties and applications.

A high-speed video camera

For single-phase, two-phase flow processes and high-speed shooting and analysis.

IR spectrometer for plasma products diagnostics

The purpose of the spectrometer is various solid, liquid and gaseous products infrared (IR) analysis, elemental composition of various materials determination.

The system for measurement of exhaust gas and smoke analysis and flow energy measurement

Fast and accurate exhaust gas and smoke analysis. Measurement of CO, CO2, CxHy, SO2, O2, NO, NO2, H2 concentrations in gas mixtures.

Double Langmuir probe and analysis equipment

The probe is used for diagnostics of non-equilibruim or equilibrium plasmas, temperature and concentration measurement of electrons, ions and radicals.

Device of formation and modification of constructional material surfaces in plasma

The purpose of the device is formation of coatings on various substrates in the ambient of atmospheric pressure plasma.

Coordinate-positioning and antivibration table

Ideal for isolation of low frequency vibrations (up to 2 Hz) and are used to isolate vibration from sensitive lab equipment.

Stabilized power source for plasma generators

A high performance power supply for plasma generators and other devices.

Formation of catalytic and tribological coatings in the plasma environment

Coatings formation on metal, ceramic, etc. substrates, using the materials required by the customer, gas, maintaining the required plasma flow temperature, velocity and other conditions.

Treatment, melting, fibre formation of various materials, using plasma, high temperature gas environment

Modification, decomposition, melting, fibrillation, gasification of various materials in plasma flow.

Plasma and high temperature gas flow diagnostics

Design and manufacture of various gas-plasma generating installations, determination of characteristics of high-temperature gas and plasma flows.

Resistance tests of high-temperature resistant materials

Testing of various materials in the high temperature (air, nitrogen, hydrogen, argon propane, etc.) gas flow.

Optical research of processes using high-speed camera

Filming of various rapid processes using high-speed optical camera, analysis of results.

Inorganic and organic material composition analysis by infrared spectrometer

Determination and analysis of the chemical composition of different materials by infrared spectrometer in wavelength range of 375-7500 cm-1.

Vibration suppression performing precise measurements

Suppress any mechanical vibrations during work.

Precise positioning of objects in directions of X, Y, Z axis

Precise positioning (error up to 0,31 μm) of samples, thermocouples, lasers or other objects weighted up to 3 kg in X, Y, Z axis directions. Maximum travel speed 10 mm/s.

Gas composition analysis: determination of H2, CO, CO2, SO2, NOx, O2, CxHy concentrations

Exhaust gas flow rate 20-100 l/min; temperature up to 1700 oC; possibility to measure gas composition and temperature continuously for up to 8 hours in a day.

NDIR (non-dispersive infrared) technology is used.

Analyzed gas limits: CO – 0-100%, CO2 – 0-50%, CxHy – 0-30,000 ppm, SO2 – 0-5000 ppm, O2 – 0-25%, NO – 0-4000 ppm, NO2 – 0-1000 ppm.

Continuous direct measurement of hydrogen gas concentration and temperature.

Hydrogen concentration limits 0-100% vol.

Formation of catalytic and tribological coatings in the plasma environment

Coatings formation on metal, ceramic, etc. substrates, using the materials required by the customer, gas, maintaining the required plasma flow temperature, velocity and other conditions.

Treatment, melting, fibre formation of various materials, using plasma, high temperature gas environment

Modification, decomposition, melting, fibrillation, gasification of various materials in plasma flow.

Plasma and high temperature gas flow diagnostics

Design and manufacture of various gas-plasma generating installations, determination of characteristics of high-temperature gas and plasma flows.

Resistance tests of high-temperature resistant materials

Testing of various materials in the high temperature (air, nitrogen, hydrogen, argon propane, etc.) gas flow.

Optical research of processes using high-speed camera

Filming of various rapid processes using high-speed optical camera, analysis of results.

Inorganic and organic material composition analysis by infrared spectrometer

Determination and analysis of the chemical composition of different materials by infrared spectrometer in wavelength range of 375-7500 cm-1.

Vibration suppression performing precise measurements

Suppress any mechanical vibrations during work.

Precise positioning of objects in directions of X, Y, Z axis

Precise positioning (error up to 0,31 μm) of samples, thermocouples, lasers or other objects weighted up to 3 kg in X, Y, Z axis directions. Maximum travel speed 10 mm/s.

Gas composition analysis: determination of H2, CO, CO2, SO2, NOx, O2, CxHy concentrations

Exhaust gas flow rate 20-100 l/min; temperature up to 1700 oC; possibility to measure gas composition and temperature continuously for up to 8 hours in a day.

NDIR (non-dispersive infrared) technology is used.

Analyzed gas limits: CO – 0-100%, CO2 – 0-50%, CxHy – 0-30,000 ppm, SO2 – 0-5000 ppm, O2 – 0-25%, NO – 0-4000 ppm, NO2 – 0-1000 ppm.

Continuous direct measurement of hydrogen gas concentration and temperature.

Hydrogen concentration limits 0-100% vol.

Optical spectrometer

The determination of flames and plasma flow emission spectra and elemental composition using an optical spectrometer.

The formation of electrode coatings

The formation and study of electrode coatings for energy generation, accumulation and storage facilities.

Ceramic fiber formation

The melting of ceramic materials and synthesis, application and study of high-temperature ceramic fiber for thermal insulation, fine filter and catalyst production.

Reduced-pressure plasma technology

The development, research and application of atmospheric, reduced and low-pressure plasma technology.

Water vapor plasma technology

The employment of water vapor and other gases plasma for biomass and solid fuel conversion, neutralization of hazardous materials and etc.

The formation of catalytic, tribological and protective coatings

The catalytic, tribological and protective coatings on various surfaces formed in plasma environment, the study of their properties and applications.

A high-speed video camera

For single-phase, two-phase flow processes and high-speed shooting and analysis.

IR spectrometer for plasma products diagnostics

The purpose of the spectrometer is various solid, liquid and gaseous products infrared (IR) analysis, elemental composition of various materials determination.

The system for measurement of exhaust gas and smoke analysis and flow energy measurement

Fast and accurate exhaust gas and smoke analysis. Measurement of CO, CO2, CxHy, SO2, O2, NO, NO2, H2 concentrations in gas mixtures.

Double Langmuir probe and analysis equipment

The probe is used for diagnostics of non-equilibruim or equilibrium plasmas, temperature and concentration measurement of electrons, ions and radicals.

Device of formation and modification of constructional material surfaces in plasma

The purpose of the device is formation of coatings on various substrates in the ambient of atmospheric pressure plasma.

Coordinate-positioning and antivibration table

Ideal for isolation of low frequency vibrations (up to 2 Hz) and are used to isolate vibration from sensitive lab equipment.

Stabilized power source for plasma generators

A high performance power supply for plasma generators and other devices.