Design and development of combustion equipment

Video camera ICCD iStar DH734 with image analysis software

Applicable for combustion process diagnostics, analysis of other fast processes where optical sensitivity is necessary.

Multifunctional parameters (T, p, Δp, v) measurement system

The system is intended to use in studies of biofuel combustion efficiency.

Biofuel pellet supply and combustion system

For various biomass pellets combustion parameters and emissions studies.

Solid biofuel gasification unit

Studies of gasification process of solid recovered fuels, i.e., separation of synthesized gas phase in the reactor and subsequent determination of the gas parameters and its application.

Analytical equipment for solid fuel and high-calorific waste ash melting state analysis

To visualize ash melting state and analyze conditions to get information about ash softening, melting processes, depending on the temperature or its gradient values changes.

Gas calorimeter

The calorific analysis of natural, pyrolysis, liquefied petroleum gas, biogas and gas mixtures.

Thermovisor

Heat flow visualization and measurement.

Portable combustion products (NO/NO2, CO, CO2, SO2, H2O, CiHj, O2) analyser

Combustion analysis of heating equipment (boilers, fireplaces, etc.) fired with solid and liquid fuel at operation site.

Measurements of parameters (T, p, Δp, v)

Measurements of temperature, pressure, differential pressure and speed, measurement data collection and recording.

Analysis of the melting state of the ash

It is intended to analyze the ash melting state and conditions and to visualize how the softening and melting processes of ash take place, depending on the temperature or  variation of its gradient value.

Measurements of parameters (T, p, Δp, v)

Measurements of temperature, pressure, differential pressure and speed, measurement data collection and recording.

Analysis of the melting state of the ash

It is intended to analyze the ash melting state and conditions and to visualize how the softening and melting processes of ash take place, depending on the temperature or  variation of its gradient value.

Video camera ICCD iStar DH734 with image analysis software

Applicable for combustion process diagnostics, analysis of other fast processes where optical sensitivity is necessary.

Multifunctional parameters (T, p, Δp, v) measurement system

The system is intended to use in studies of biofuel combustion efficiency.

Biofuel pellet supply and combustion system

For various biomass pellets combustion parameters and emissions studies.

Solid biofuel gasification unit

Studies of gasification process of solid recovered fuels, i.e., separation of synthesized gas phase in the reactor and subsequent determination of the gas parameters and its application.

Analytical equipment for solid fuel and high-calorific waste ash melting state analysis

To visualize ash melting state and analyze conditions to get information about ash softening, melting processes, depending on the temperature or its gradient values changes.

Gas calorimeter

The calorific analysis of natural, pyrolysis, liquefied petroleum gas, biogas and gas mixtures.

Thermovisor

Heat flow visualization and measurement.

Portable combustion products (NO/NO2, CO, CO2, SO2, H2O, CiHj, O2) analyser

Combustion analysis of heating equipment (boilers, fireplaces, etc.) fired with solid and liquid fuel at operation site.