Computer equipment for large-scale computing.
Seminar hall rental.
Evaluation of neutron multiplication coefficient of system, modelling of ionizing radiation and radiation shielding parameters.
The software is used for separate neutron, photon, electron or combined neutron, photon and electron transfer simulation and for calculations of critical neutron multiplication coefficient.
Fire evaluation (simulation) in both nuclear and non-nuclear energy facilities during their operation and during decommissioning.
Determination of the amount and size of particulates emitted with combustion products.
With the assist of geochemical model the models of the course and duration of chemical processes occurring in the water / solid phase systems are created for the simulation of chemical changes, solubility and sorption of pollutants in water / solid phase systems.
The tasks solvation of various branches of science (technical, engineering, economics, etc.).
Various large-scale benchmark calculations.
Thermo-hydraulic analysis of design and non-design related accidents of nuclear / thermal power plants and other thermohydraulic equipment and systems.
The solution of the dynamic, contact tasks of the degradation mechanics of structures using contact elements and evaluating the nonlinear properties of the material and analysis of the sensitivity of the solutions obtained.
Strength analysis of structures applying static and dynamic loads, using finite element method of movement simulation and validation. Preparation of geometric models for the Abaqus program.
Probabilistic and cyclic fatigue analysis of deterministic finite element models.
3D criticality assessment in complex systems using the Monte Carlo method; Assessment of the criticality of spent nuclear fuel systems combined with fuel combustion and criticality calculation aspects. Analysis of the true values of critical systems for sensitivity of cross sections in 1D / 3D systems. Determination of the maximum true values of the critical system and the minimum critical mass. 2D calculations of flow and combustion. Preparation of cross section libraries according to preselected dependencies. Estimation of neutron and photon flow in geometric regions and at point detectors placed outside the geometry limits.
Analysis of static and dynamic processes occurring in trunk pipeline systems (mainly in city centralized heat supply networks, hot or cold water supply, as well as gas and oil pipelines).
The solution of the slow neutron transport equation using the hybrid deterministic / Monte Carlo method. Calculations of reactivity, power profiles, nuclide composition of spent nuclear fuel, calculations of nuclear reaction types, taking into account the characteristics of the cells. Criticality Search. Neutron Spectrum and Flow Analysis.
Creating of graphical information in popular DWG file format.
Design of complex 3D mechanisms. Design of molds, cables and belt drives for pipes and piping systems. Motion simulation, dynamic and finite element analysis.
Risk monitoring assessing different operating modes of the (closing and new) nuclear power plants, equipment failure, repairs, periodic testing, different system configurations, environmental factors, etc.
Using Autocad MEP software the design documentation (drawings) are prepared, complex two-dimensional and three-dimensional (spatial) structures are constructed
Fire simulation in various rooms.
This geochemical simulation program aloud us creating various models of chemical processes that take part in the analyzed water/solid phase systems; these models are used for simulation of pollutants’ chemical changes, solubility and sorption in water/solid phase systems.
Environment impact assessment.
Program is designed for simulation of the rainfall-water cycle from the moment the water reaches the ground till its final locations.
System for database management.
This computer program because of its environment of specialized toolboxes are widely used in various branches of science (technical, engineering, economic, etc.).
Nuclear facility design and safety analysis.
Creating graphs and graphical data processing.
Program is designed especially for mechanical, electrical, plumbing and heat network designers and drafters.
Translation program.
Simulation of pollutants distribution in nature and engineered systems.
The most popular simulation program of fluid flow worldwide.
It is used to provide a multitude of ways to organize, filter and sort activities, projects, and resources.
Program for professional project management designed to handle large-scale, highly sophisticated and multifaceted projects.
Complex groundwater influence to ground layers analysis.
Simulation of the transport of mass within engineered and natural environment.
Software is designed for evaluation of dose from sky scattered (skyshine) gamma ray radiation.
Evaluation of neutron multiplication coefficient of system, modelling of ionizing radiation and radiation shielding parameters.
The software is used for separate neutron, photon, electron or combined neutron, photon and electron transfer simulation and for calculations of critical neutron multiplication coefficient.
Fire evaluation (simulation) in both nuclear and non-nuclear energy facilities during their operation and during decommissioning.
Determination of the amount and size of particulates emitted with combustion products.
With the assist of geochemical model the models of the course and duration of chemical processes occurring in the water / solid phase systems are created for the simulation of chemical changes, solubility and sorption of pollutants in water / solid phase systems.
The tasks solvation of various branches of science (technical, engineering, economics, etc.).
Thermo-hydraulic analysis of design and non-design related accidents of nuclear / thermal power plants and other thermohydraulic equipment and systems.
The solution of the dynamic, contact tasks of the degradation mechanics of structures using contact elements and evaluating the nonlinear properties of the material and analysis of the sensitivity of the solutions obtained.
Strength analysis of structures applying static and dynamic loads, using finite element method of movement simulation and validation. Preparation of geometric models for the Abaqus program.
Probabilistic and cyclic fatigue analysis of deterministic finite element models.
3D criticality assessment in complex systems using the Monte Carlo method; Assessment of the criticality of spent nuclear fuel systems combined with fuel combustion and criticality calculation aspects. Analysis of the true values of critical systems for sensitivity of cross sections in 1D / 3D systems. Determination of the maximum true values of the critical system and the minimum critical mass. 2D calculations of flow and combustion. Preparation of cross section libraries according to preselected dependencies. Estimation of neutron and photon flow in geometric regions and at point detectors placed outside the geometry limits.
Analysis of static and dynamic processes occurring in trunk pipeline systems (mainly in city centralized heat supply networks, hot or cold water supply, as well as gas and oil pipelines).
The solution of the slow neutron transport equation using the hybrid deterministic / Monte Carlo method. Calculations of reactivity, power profiles, nuclide composition of spent nuclear fuel, calculations of nuclear reaction types, taking into account the characteristics of the cells. Criticality Search. Neutron Spectrum and Flow Analysis.
Design of complex 3D mechanisms. Design of molds, cables and belt drives for pipes and piping systems. Motion simulation, dynamic and finite element analysis.
Risk monitoring assessing different operating modes of the (closing and new) nuclear power plants, equipment failure, repairs, periodic testing, different system configurations, environmental factors, etc.
Using Autocad MEP software the design documentation (drawings) are prepared, complex two-dimensional and three-dimensional (spatial) structures are constructed
This geochemical simulation program aloud us creating various models of chemical processes that take part in the analyzed water/solid phase systems; these models are used for simulation of pollutants’ chemical changes, solubility and sorption in water/solid phase systems.
Program is designed for simulation of the rainfall-water cycle from the moment the water reaches the ground till its final locations.
This computer program because of its environment of specialized toolboxes are widely used in various branches of science (technical, engineering, economic, etc.).
Program is designed especially for mechanical, electrical, plumbing and heat network designers and drafters.
It is used to provide a multitude of ways to organize, filter and sort activities, projects, and resources.
Program for professional project management designed to handle large-scale, highly sophisticated and multifaceted projects.
Software is designed for evaluation of dose from sky scattered (skyshine) gamma ray radiation.
