Publications
https://orcid.org/0000-0003-4429-6328
2026
- Plasma-assisted combustion of low calorific gases under different oxygen-enrichment level , Fuel — DOI: 10.1016/j.fuel.2025.137392
2025
- Co-Pyrolysis of Plastic Waste and Lignin: A Pathway for Enhanced Hydrocarbon Recovery , Energies — DOI: 10.3390/en18020275
- Hydrogen Enrichment Effect on Heat Flux from Plasma-Assisted Flames , Energies — DOI: 10.3390/en18225880
2024
- Performance of Corn Cob Combustion in a Low-Temperature Fluidized Bed , Energies — DOI: 10.3390/en17092196
- Experimental study on luminescence and thermal radiation characteristics of plasma assisted-biogas flames changing CO2 dilution level , Fuel — DOI: 10.1016/j.fuel.2024.132014
2023
- Complex study of bioplastics: Degradation in soil and characterization by FTIR-ATR and FTIR-TGA methods , Energy — DOI: 10.1016/j.energy.2023.127320
2022
- Combustion performance of low calorific gas enriched by oxygen and ozone , Fuel — DOI: 10.1016/j.fuel.2022.124761
- Emission Spectroscopy of CH4/CO2 Mixtures Processed in a Non-Thermal Plasma Augmented Burner , Catalysts — DOI: 10.3390/catal12121540
2021
- Combustion of waste gas in a low-swirl burner under syngas and oxygen enrichment , Fuel — DOI: 10.1016/j.fuel.2021.120730
- An intensification of biomass and waste char gasification in a gasifier , Energies — DOI: 10.3390/en14071983
2020
- A sustainable approach for plasma reforming of tail biogas for onsite syngas production during lean combustion operation , Energy Conversion and Management — DOI: 10.1016/j.enconman.2020.112617
- Chemiluminescence-based characterization of tail biogas combustion stability under syngas and oxygen-enriched conditions , Experimental Thermal and Fluid Science — DOI: 10.1016/j.expthermflusci.2020.110133
- Biogas combustion with various oxidizers in a nanosecond DBD microplasma burner , Experimental Thermal and Fluid Science — DOI: 10.1016/j.expthermflusci.2020.110166
- Parameters influencing wet biofuel drying during combustion in grate furnaces , Fuel — DOI: 10.1016/j.fuel.2020.117013
- Investigation of waste biogas flame stability under oxygen or hydrogen‐enriched conditions , Energies — DOI: 10.3390/en13184760
- Online determination of potassium and sodium release behaviour during single particle biomass combustion by FES and ICP-MS , Science of the Total Environment — DOI: 10.1016/j.scitotenv.2020.141162
2019
- Thermal Analysis of Waste Fishing Nets for Polymer Recovery , Waste and Biomass Valorization — DOI: 10.1007/s12649-019-00803-w
- Application of Non-Thermal Plasma for NOx Reduction in the Flue Gases , Energies — DOI: 10.3390/en12203955
- Investigation of K*, Na* and Ca* flame emission during single biomass particle combustion , Combustion Science and Technology — DOI: 10.1080/00102202.2018.1452408
2018
- Investigation of regularities of pelletized biomass thermal deformations during pyrolysis , Thermal Science — DOI: 10.2298/TSCI160916090P
- Investigation on syngas assisted combustion for low emission operation in gas burner , European Biomass Conference and Exhibition Proceedings
- Effect of producer gas addition and air excess ratio on natural gas flame luminescence , Fuel — DOI: 10.1016/j.fuel.2017.12.094
2017
- Estimating the fuel moisture content to control the reciprocating grate furnace firing wet woody biomass , Energy Conversion and Management — DOI: 10.1016/j.enconman.2017.04.014
- Evaluation of straw with absorbed glycerol thermal degradation during pyrolysis and combustion by TG-FTIR and TG-GC/MS , Fuel — DOI: 10.1016/j.fuel.2017.05.063
2016
- Biomass and waste gasification in Lithuania: State of the art and future perspectives,Biomasės ir atliekų dujinimo tyrimai Lietuvoje: Esama būklė ir ateities perspektyvos , Energetika — DOI: 10.6001/energetika.v62i4.3396
2015
- Experimental investigation of wood pellet swelling and shrinking during pyrolysis , Fuel — DOI: 10.1016/j.fuel.2014.11.023
2014
- An evaluation of performance of automatically operated multi-fuel downdraft gasifier for energy production , Applied Thermal Engineering — DOI: 10.1016/j.applthermaleng.2014.09.007
- Experimental and theoretical investigation of wood pellet shrinkage during pyrolysis,Medžio granulės pokyčių pirolizės metu eksperimentinis ir teorinis tyrimas , Energetika — DOI: 10.6001/energetika.v60i1.2867
2010
- Thermovision investigation of materials parameters after energy pulse , 3rd International Conference - Radiation Interaction with Material and Its Use in Technologies 2010, Program and Materials, Interaction'2010
International projects
Horizon Europe
The ResMe2E project aims to revolutionize small-scale green energy production by developing systems for generating green methanol from biogenic residues and converting this synthetic More
Nordic Energy Research Programme (NERP)
The increasing consumerism leads to rising amounts of plastic waste, and it is estimated that 6.3 billion tons of this waste were generated globally up to 2018. Plastic waste is a higMore
Interreg
Methane is one of the most important greenhouse gases with a Global Warming Potential (GWP) of 34 on a timespan of 100 years, according to IPCC’s 5th Assessment Report. The concenMore
COST
Description Industrial production is responsible for roughly 30% of global energy use, with Energy Intensive Industries (EIIs) representing the largest share (54% of OECD’s total indMore
Projects in Lithuania
EU Structural Funds
UAB „AXIS Tech“ AXIS Tech, together with its partner Lithuanian Energy Institute, are implementing the project "AXIS Tech R&D activities for the development of innovative solutions More
Lietuvos energetikos institutas įgyvendina projektą „Kompetencijos centro MTEP veiklų vykdymas, sukuriant ir išbandant inovatyvų dujinių biodegalų gamybos prototipą“ Nr. 01.2.2-CPMore
Research Council of Lithuania projects
Investigation of thermal radiation enhancement from alternative fuel flames in industrial furnaces (Rad2Fun) In order to achieve the greenhouse gas (GHG) reduction targets, fossil More
Plastic packaging waste is one of the most serious health and environmental problems that is getting a lot of attention at the present. However, most of the attention and technical soMore