Thermal analysis of materials with evolved gas analysis by FTIR and GCMS methods.
Determination of heating value of biofuel, mixtures and calorific waste for determination of suitability of combustion in industrial furnaces.
Used for the analysis of the products from biofuel thermal destruction (gasification) and combustion.
Solid fuel and high-calorie waste sample preparation for supply them to the analytical instruments and making suitable working conditions for samples mineralization.
The calorific analysis of natural, pyrolysis, liquefied petroleum gas, biogas and gas mixtures.
Combustion analysis of heating equipment (boilers, fireplaces, etc.) fired with solid and liquid fuel at operation site.
Determination and analysis of ash content, volatile matter and volatile composition of biofuels and recovered fuels Analysis of materials state transitions.
Major and minor element analysis of liquid and solid organic and mineral compounds of biofuels and recovered fuel.
Solid and liquid fuels, including biofuels and recovered fuel samples weighing in fuel moisture and ash analysis.
Very small air (gas) flow measurement in small-diameter channels or streams flowing through membranes;
Air-gas (sample) volume measurements at various gas formation and quantitative characteristics of analysers.
Evaluation of fuel quality, prices, quantities of heat and, performance parameters of thermal equipment.
The preparation of solid and calorific waste and soft, hard, elastic and fibrous materials of 0,25 ÷ 20 mm fractions. Compression of crushed materials into suitable samples for analysis. Ensuring proper working conditions while mineralizing the samples. Preparation of deionised water for mineralization of samples.
The determination of the Cl, F, Br concentration in the fuel in order to assess possible environmental pollution with harmful elements and evaluation of fuel quality indicators.
Identification and analysis of upper and lower heating values of gaseous fuels, including biofuels and recovered fuels. Determination and analysis of upper and lower heating values of other calorific materials (eg sewage sludge, waste, etc.).
Determination of fuel elements in order to assess the fuel quality indicators and possible environmental pollution with harmful elements.
Precise measurements of fuel humidity and ash content, assessment of fuel quality indicators and combustion rate.
The determination of the chemical elements C/H/N/S and O in the fuel, evaluation of its qualitative and quantitative indicators.
The determination of the upper and lower calorific values and analysis of solid and liquid fuels, including biofuels and recovered fuels.
The preparation of solid and calorific waste and soft, hard, elastic and fibrous materials of 0,25 ÷ 20 mm fractions. Compression of crushed materials into suitable samples for analysis. Ensuring proper working conditions while mineralizing the samples. Preparation of deionised water for mineralization of samples.
The determination of the Cl, F, Br concentration in the fuel in order to assess possible environmental pollution with harmful elements and evaluation of fuel quality indicators.
Identification and analysis of upper and lower heating values of gaseous fuels, including biofuels and recovered fuels. Determination and analysis of upper and lower heating values of other calorific materials (eg sewage sludge, waste, etc.).
Determination of fuel elements in order to assess the fuel quality indicators and possible environmental pollution with harmful elements.
Precise measurements of fuel humidity and ash content, assessment of fuel quality indicators and combustion rate.
The determination of the chemical elements C/H/N/S and O in the fuel, evaluation of its qualitative and quantitative indicators.
The determination of the upper and lower calorific values and analysis of solid and liquid fuels, including biofuels and recovered fuels.
Thermal analysis of materials with evolved gas analysis by FTIR and GCMS methods.
Determination of heating value of biofuel, mixtures and calorific waste for determination of suitability of combustion in industrial furnaces.
Used for the analysis of the products from biofuel thermal destruction (gasification) and combustion.
Solid fuel and high-calorie waste sample preparation for supply them to the analytical instruments and making suitable working conditions for samples mineralization.
The calorific analysis of natural, pyrolysis, liquefied petroleum gas, biogas and gas mixtures.
Combustion analysis of heating equipment (boilers, fireplaces, etc.) fired with solid and liquid fuel at operation site.
Determination and analysis of ash content, volatile matter and volatile composition of biofuels and recovered fuels Analysis of materials state transitions.
Major and minor element analysis of liquid and solid organic and mineral compounds of biofuels and recovered fuel.
Solid and liquid fuels, including biofuels and recovered fuel samples weighing in fuel moisture and ash analysis.
Very small air (gas) flow measurement in small-diameter channels or streams flowing through membranes;
Air-gas (sample) volume measurements at various gas formation and quantitative characteristics of analysers.
Manufacturer: Sierra Instruments
Evaluation of fuel quality, prices, quantities of heat and, performance parameters of thermal equipment.
