Publications
https://orcid.org/0000-0002-4668-7093
2026
- Microstructural Evaluation of Plasma-Vitrified Wind Turbine Blade Slag and Its Alternative Application in Geopolymer , Crystals — DOI: 10.3390/cryst16050334
2025
- Investigation of In-Flight Alumina Particle Interaction with a Plasma Jet in a Thermal Plasma Reactor , Crystals — DOI: 10.3390/cryst15100851
- Effect of TiO<sub>2</sub> Content on the Corrosion and Thermal Resistance of Plasma-Sprayed Al<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub> Coatings , Crystals — DOI: 10.3390/cryst15050439
2024
- An Investigation of Fly Ash and Slag Processing and Fiber Production Using Plasma Technology , Applied Sciences — DOI: 10.3390/app14114801
2023
- Research on the Energy Characteristics of a Transferred Arc Plasma-Chemical Reactor for Waste Treatment , Applied Sciences — DOI: 10.3390/app13074221
- Recycling of Wind Turbine Blades into Microfiber Using Plasma Technology , Materials — DOI: 10.3390/ma16083089
2022
- Influence of Plasma Torch Power on the Plasma Jet Properties and Microstructure of Alumina Coatings , Coatings — DOI: 10.3390/coatings12070934
- Investigations of Working Characteristics of Transferred Arc Plasma Torch Volume Reactor , Applied Sciences (Switzerland) — DOI: 10.3390/app12052624
2021
- The effect of heat treatment on the microstructure and phase composition of plasma sprayed Al<sub>2</sub> O<sub>3</sub> and Al<sub>2</sub> O<sub>3</sub>-TiO<sub>2</sub> coatings for applications in biomass firing plants , Coatings — DOI: 10.3390/coatings11111289
2020
- The investigation of an electric arc in a plasma chemical reactor for hazardous waste treatment , Journal of Chemical Technology and Biotechnology — DOI: 10.1002/jctb.6045
2016
- A cleaner production of synthesis gas from glycerol using thermal water steam plasma , Journal of Cleaner Production — DOI: 10.1016/j.jclepro.2015.11.024
2015
- Behaviour of dispersed ceramic particles in DC arc plasma jet during the spray deposition of coatings , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012380
- Water vapor plasma torch for synthesis gas production from organic waste , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012282
- Water vapor plasma torch for synthesis gas production from organic waste , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012722
- Behaviour of dispersed ceramic particles in DC arc plasma jet during the spray deposition of coatings , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012743
2014
- Plasma spray deposition and characterization of catalytic coatings for environmental application , Fresenius Environmental Bulletin
- Operational parameters of thermal water vapor plasma torch and diagnostics of generated plasma jet , Romanian Reports in Physics
- The employment of a high density plasma jet for the investigation of thermal protection materials , Physica Scripta — DOI: 10.1088/0031-8949/2014/T161/014069
- Diagnostic methods used for atmospheric pressure thermal arc plasma , Physica Scripta — DOI: 10.1088/0031-8949/2014/T161/014059
- Production of synthesis gas from propane using thermal water vapor plasma , International Journal of Hydrogen Energy — DOI: 10.1016/j.ijhydene.2013.11.134
2013
- Water vapour plasma generation for environmental purposes , Fresenius Environmental Bulletin
- The research on atmospheric pressure water vapour plasma generation and application for the destruction of wastes , Acta Polytechnica
- The simultaneous synthesis of hydrogen-rich gas and oxidation of fine metal particles in water vapour plasma , Problems of Atomic Science and Technology
- Synthesis of catalytic fibers employing atmospheric pressure arc plasma technology , Digest of Technical Papers-IEEE International Pulsed Power Conference — DOI: 10.1109/PPC.2013.6627584
- Experimental modelling of tar destruction with addition of CO<sub>2</sub> for application in the biomass gasification system , Applied Thermal Engineering — DOI: 10.1016/j.applthermaleng.2013.07.042
2012
- Distribution of dynamic and thermal characteristics in a non-equilibrium plasma jet , Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer — DOI: 10.1615/ICHMT.2012.ProcSevIntSympTurbHeatTransfPal.1690
- Preparation and characterization of TiO <sub>2</sub>-based plasma-sprayed coatings for NO <sub>x</sub> abatement , Catalysis Today — DOI: 10.1016/j.cattod.2012.05.013
- Syngas production from hydrocarbon-containing gas in ambient of water vapor plasma , Catalysis Today — DOI: 10.1016/j.cattod.2012.05.027
- Comparison of steam reforming and partial oxidation of biomass pyrolysis tars over activated carbon derived from waste tire , Catalysis Today — DOI: 10.1016/j.cattod.2012.04.065
- Improving syngas production from glycerol using plasma sprayed catalytic coatings , Catalysis Today — DOI: 10.1016/j.cattod.2012.02.034
2011
- Design and operating characteristics of water vapor plasma torch for environmentally friendly processes , 8th International Conference on Environmental Engineering, ICEE 2011
- Creation of linear DC plasma generator for pyrolysis/gasification of organic materials , Nukleonika
- The influence of plasma spraying regime and initial substance injection location on the structure of deposited coatings , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2011.04.067
- Water vapor plasma technology for biomass conversion to synthetic gas , Catalysis Today — DOI: 10.1016/j.cattod.2010.12.029
- High temperature ablation of composite material under plasma jet impact , Medziagotyra — DOI: 10.5755/j01.ms.17.4.781
2010
- Water vapor plasma generation under athmospheric pressure for the treatment of waste and biomass , 3rd International Conference - Radiation Interaction with Material and Its Use in Technologies 2010, Program and Materials, Interaction'2010
- Effect of outlet nozzle design on the morphology and microstructure of micro - And nanostructure fibre formed by means of plasma technology , 3rd International Conference - Radiation Interaction with Material and Its Use in Technologies 2010, Program and Materials, Interaction'2010
2009
- Measurement and numerical simulation of two-phase plasma flow in plasma spray process , Lithuanian Journal of Physics — DOI: 10.3952/lithjphys.49104
2008
- The synthesis of fine particles during plasma spray pyrolysis process , Problems of Atomic Science and Technology
- Measurement and numerical simulation of two-phase plasma flow in plasma spray process , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Heat transfer in a plasma jet reactor for melting and melt fibrillation of hard ceramics , Heat Transfer Research — DOI: 10.1615/HeatTransRes.v39.i7.50
2006
- Preparation of insulating refractory materials by plasma spray technology , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v10.i3.20
2004
- Waste and biomass treatment employing plasma technology , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v8.i2.110
- Electric and thermal characteristics of the linear, sectional dc plasma generator , Plasma Sources Science and Technology — DOI: 10.1088/0963-0252/13/2/002
2003
- Preparation of catalytic coatings for heterogeneous catalysts employing atmospheric pressure non-equilibrium plasma , Surface and Coatings Technology — DOI: 10.1016/S0257-8972(03)00617-0
- Study of high temperature thermal boundary conditions on active surfaces of the cylinder shaped ultrasonic transducers , International Journal of Heat and Mass Transfer — DOI: 10.1016/S0017-9310(03)00230-8
International projects
Interreg
The pollution control is a transnational request of all countries and a strategic aim of the European Union. This is also reflected in the increasing tightening of the exhaust emissioMore
COST
Plasmas generated in liquids and gas discharges interacting with liquids are today hot topic greatly interesting plasma physicists and plasma chemists due to the broad field of potentMore
The main objective of the Action is to generate a synergistic approach for utilisation of biomass for sustainable fuels & chemicals through cooperation between scientists from difMore
The main objective of the Action is to increase our knowledge and understanding of the properties of oxide surfaces and interfaces at an atomistic level and to develop the means of prMore
The Action aimed to increase the knowledge of environmental impacts of manufacturing processes in order to develop and implement environmentally conscious processes, reduce environmenMore
EUREKA
The aim of this work is the investigation of ceramic fibre forming ability from the Si, Mg, Ca and Al oxide system employing plasma technology, the realisation of fibre synthesis procMore
Other international projects
Investigation of plasma-induced effects in efficient energy waste processing technologies for hydrogen extraction Project ID (LMT): P-LUP-22-66 Coordinator: Lietuvos eMore
Projects in Lithuania
Research Council of Lithuania projects
Lietuvos energetikos institutas įgyvendina projektą „Plazmocheminis reaktorius pavojingų atliekų apdorojimui: sukūrimas, gamyba, tyrimas ir pritaikymas“ Nr. 01.2.2-LMT-K-718 finansuojMore