Position:
Senior research associate
Room number:
108-LK
Phone number:
+37037401894
Email:
Publications
https://orcid.org/0000-0002-5505-5282
2025
- Investigation of In-Flight Alumina Particle Interaction with a Plasma Jet in a Thermal Plasma Reactor , Crystals — DOI: 10.3390/cryst15100851
- Effect of TiO2 Content on the Corrosion and Thermal Resistance of Plasma-Sprayed Al2O3-TiO2 Coatings , Crystals — DOI: 10.3390/cryst15050439
2024
- Influence of Graphite and Zirconia Addition on the Tribological Properties of Plasma-Sprayed Alumina Coatings , Coatings — DOI: 10.3390/coatings14080978
- An Investigation of Fly Ash and Slag Processing and Fiber Production Using Plasma Technology , Applied Sciences — DOI: 10.3390/app14114801
2023
- Research on the Energy Characteristics of a Transferred Arc Plasma-Chemical Reactor for Waste Treatment , Applied Sciences — DOI: 10.3390/app13074221
- Effect of Spraying Power on the Tribological Properties of Alumina and Alumina-Graphite Coatings , Coatings — DOI: 10.3390/coatings13071165
- Recycling of Wind Turbine Blades into Microfiber Using Plasma Technology , Materials — DOI: 10.3390/ma16083089
- Tribological Properties of Cr2O3, Cr2O3–SiO2-TiO2 and Cr2O3–SiO2-TiO2-Graphite Coatings Deposited by Atmospheric Plasma Spraying , Coatings — DOI: 10.3390/coatings13020408
2022
- Influence of Plasma Torch Power on the Plasma Jet Properties and Microstructure of Alumina Coatings , Coatings — DOI: 10.3390/coatings12070934
- POSSIBILITY OF RECYCLING WIND TURBINE BLADES USING PLASMA TECHNOLOGY , WIT Transactions on Ecology and the Environment — DOI: 10.2495/WMEI220061
- Investigations of Working Characteristics of Transferred Arc Plasma Torch Volume Reactor , Applied Sciences (Switzerland) — DOI: 10.3390/app12052624
2021
- The Effect of Heat Treatment on the Microstructure and Phase Composition of Plasma Sprayed Al<sub>2</sub>O<sub>3</sub> and Al<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub> Coatings for Applications in Biomass Firing Plants , Coatings — DOI: 10.3390/coatings11111289
- Formation of graphite-copper/n-silicon schottky photovoltaic diodes using different plasma technologies , Energies — DOI: 10.3390/en14216896
- Influence of different plasma spraying methods on the physical properties of YSZ coatings , Surfaces and Interfaces — DOI: 10.1016/j.surfin.2021.101120
- Improvement of the tribological properties of alumina coatings by zirconia addition , Coatings — DOI: 10.3390/coatings11080991
2020
- Tribological properties of plasma sprayed alumina, alumina-titania and alumina-zirconia coatings , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.138.656
- Thermal And Chemical Resistance Of Plasma Sprayed Al2o3, Al2o3-Tio2 Coatings , ResearchSquare — DOI: 10.21203/rs.3.rs-18422
- The investigation of an electric arc in a plasma chemical reactor for hazardous waste treatment , Journal of Chemical Technology and Biotechnology — DOI: 10.1002/jctb.6045
2019
- The study of the thermal treatment on the surface microstructure and electrical conductivity of the copper/graphite composites , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.136.400
- TRIBOLOGICAL PROPERTIES OF ALUMINA-ZIRCONIA COMPOSITE COATINGS PREPARED BY PLASMA SPRAYING , Proceedings on Engineering Sciences — DOI: 10.24874/PES01.01.025
2018
- Microstructure and tribological properties of plasma sprayed alumina and alumina-graphite coatings , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2018.06.081
- The preparation and analysis of ceramic fibers with deposited catalytic particles by plasma technology , Journal of Physics: Conference Series — DOI: 10.1088/1742-6596/959/1/012008
2017
- Effect of powder type on structure and properties of carbon based coatings , Romanian Journal of Physics
2016
- Effect of torch power on the microstructure of plasma sprayed Al<sub>2</sub>O<sub>3</sub> coatings , Surface and Interface Analysis — DOI: 10.1002/sia.5902
- The research on plasma processes and development of plasma technologies in the Lithuanian energy institute,Plazminių procesų tyrimas ir technologijų kūrimas Lietuvos energetikos institute , Energetika — DOI: 10.6001/energetika.v62i3.3350
2015
- The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method , Journal of Electrostatics — DOI: 10.1016/j.elstat.2015.03.003
- Behaviour of dispersed ceramic particles in DC arc plasma jet during the spray deposition of coatings , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012380
- Formation of carbon composite coatings by plasma spraying , Vacuum — DOI: 10.1016/j.vacuum.2015.04.028
2014
- The employment of a high density plasma jet for the investigation of thermal protection materials , Physica Scripta — DOI: 10.1088/0031-8949/2014/T161/014069
2013
- Synthesis of catalytic fibers employing atmospheric pressure arc plasma technology , Digest of Technical Papers-IEEE International Pulsed Power Conference — DOI: 10.1109/PPC.2013.6627584
2011
- The influence of plasma spraying parameters on the microstructure and properties of ZRO<sub>2</sub>-8Y<sub>2</sub>O<sub>3</sub> coatings , BALTTRIB 2011 - 6th International Scientific Conference, Dedicated to 65th Anniversary of Faculty of Agricultural Engineering, Proceedings
- The influence of plasma spraying regime and initial substance injection location on the structure of deposited coatings , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2011.04.067
- High temperature ablation of composite material under plasma jet impact , Medziagotyra — DOI: 10.5755/j01.ms.17.4.781
2010
- Effect of outlet nozzle design on the morphology and microstructure of micro - And nanostructure fibre formed by means of plasma technology , 3rd International Conference - Radiation Interaction with Material and Its Use in Technologies 2010, Program and Materials, Interaction'2010
- Realization and analysis of inorganic metal oxide plasma melting and fibrillation process,neorganiniu metalu oksidu plazminio lydymo ir pluoštinimo proceso realizacija ir analize , Energetika
- Experimental investigation of inline tube bundle cooling with two-phase foam flow,Koridoriniu vamzdžiu pluoštu aušinimo dvifaziu putu srautu eksperimentinis tyrimas , Energetika
- Nanostructured bioceramic coatings obtained by plasma spray technique , European Cells and Materials
2009
- Evaluation of wear resistance of plasma sprayed ceramic coatings , Medziagotyra
- Microstructure analysis of fibrous material manufactured by plasma spray method , Medziagotyra
- Measurement and numerical simulation of two-phase plasma flow in plasma spray process , Lithuanian Journal of Physics — DOI: 10.3952/lithjphys.49104
- Microstructure and properties of plasma sprayed al-doped YSZ coatings , Lithuanian Journal of Physics — DOI: 10.3952/lithjphys.49108
2008
- Characterization of wear properties of plasma sprayed ceramic coatings , Medziagotyra
- Investigation of plasma coatings manufactured from synthesized zirconia , Medziagotyra
- Influence of plasma jet parameters on synthesis and properties of YSZ coatings , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Microstructure and electrical properties of doped with Al<sub>2</sub>O <sub>3</sub> YSZ thin films, produced by plasma spraying technique , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Measurement and numerical simulation of two-phase plasma flow in plasma spray process , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Application of plasma technology for nanofibre formation from oil refinery waste (zeolite),Plazminio metodo taikymas formuojant nanoplauša̧ iš naftos produktu̧ gamybos proceso atlieku̧ (ceolitu̧) , Energetika
2007
- Characterization of tribological properties of plasma sprayed ceramic coatings , BALTTRIB 2007 International Scientific Conference, Proceedings
2006
- Plazma treatment of hazardous waste,Plazminis i̧airiu̧ pavojingq atlieku̧ nukenksminimas , Energetika
- Preparation of insulating refractory materials by plasma spray technology , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v10.i3.20
2005
- Effect of alumina addition on the microstructure of plasma sprayed YSZ , Journal of the European Ceramic Society — DOI: 10.1016/j.jeurceramsoc.2005.03.027
2004
- Correlations between processing parameters and microstructure for YSZ films produced by plasma spray technique , Journal of the European Ceramic Society — DOI: 10.1016/S0955-2219(03)00389-3
- Waste and biomass treatment employing plasma technology , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v8.i2.110
1999
- Water vapour plasma torch for hazardous waste treatment , Annals of the New York Academy of Sciences — DOI: 10.1111/j.1749-6632.1999.tb08750.x
1976
- Velocity and temperature distribution in the entrance region of tube with high temperature air flow. , LIET. TSR MOKSLU A KAD. DARBAI, SER. B.
1974
- PLASMA HEAT TRANSFER DURING TURBULENT GAS FLOW IN THE ENTRANCE REGION OF A CIRCULAR TUBE. , American Society of Mechanical Engineers (Paper) — DOI: 10.2514/6.1974-718
International projects
Seventh Framework Programme (FP7)
1
Completed
01.06.2011 - 30.11.2011
Main objective of the Researcher night 2011 is to enhancing public recognition of researchers and their work, through bringing public and researchers closer to one other, tackling theMore
Interreg
1
The pollution control is a transnational request of all countries and a strategic aim of the European Union. This is also reflected in the increasing tightening of the exhaust emissioMore
COST
1
Bubbles and drops are entities of enormous practical interest since their interfaces are met in numerous industrial processes and applications of every day life. In order to enhance eMore
2
Completed
30.03.2004 - 29.03.2009
The main objective of the Action is to develop materials for improved wear resistance of artificial joints and novel low wearing designs. For this purpose, the biotribology of materiaMore
3
Completed
25.06.2001 - 24.06.2006
The Action aimed to increase the knowledge of environmental impacts of manufacturing processes in order to develop and implement environmentally conscious processes, reduce environmenMore
4
Completed
13.09.1999 - 06.07.2005
The main objective of the COST Action 525 was to understand the role played by grain boundaries in controlling the manufacture, microstructure and properties of electronic ceramics. CMore
EUREKA
1
The aim of this work is the investigation of ceramic fibre forming ability from the Si, Mg, Ca and Al oxide system employing plasma technology, the realisation of fibre synthesis procMore
Other international projects
1
Investigation of plasma-induced effects in efficient energy waste processing technologies for hydrogen extraction Project ID (LMT): P-LUP-22-66 Coordinator: Lietuvos eMore
Projects in Lithuania
Research Council of Lithuania projects
1
Completed
20.12.2017 - 30.12.2021
Lietuvos energetikos institutas įgyvendina projektą „Plazmocheminis reaktorius pavojingų atliekų apdorojimui: sukūrimas, gamyba, tyrimas ir pritaikymas“ Nr. 01.2.2-LMT-K-718 finansuojMore
Other projects in Lithuania
1
Completed
21.04.2008 - 31.12.2010
This project brought together five scientific institutions - Vilnius Gediminas Technical University (VGTU), VGTU Institute of Thermal Insulation (VGTU-TI), Lithuanian Energy InstituteMore