Pareigos:
vyresn. m. d.
Kab. nr.:
108-LK
Telefonas:
+37037401894
El. paštas:
Publikacijos
https://orcid.org/0000-0002-5505-5282
2025
- Investigation of In-Flight Alumina Particle Interaction with a Plasma Jet in a Thermal Plasma Reactor , Crystals — DOI: 10.3390/cryst15100851
- Effect of TiO2 Content on the Corrosion and Thermal Resistance of Plasma-Sprayed Al2O3-TiO2 Coatings , Crystals — DOI: 10.3390/cryst15050439
2024
- Influence of Graphite and Zirconia Addition on the Tribological Properties of Plasma-Sprayed Alumina Coatings , Coatings — DOI: 10.3390/coatings14080978
- An Investigation of Fly Ash and Slag Processing and Fiber Production Using Plasma Technology , Applied Sciences — DOI: 10.3390/app14114801
2023
- Research on the Energy Characteristics of a Transferred Arc Plasma-Chemical Reactor for Waste Treatment , Applied Sciences — DOI: 10.3390/app13074221
- Effect of Spraying Power on the Tribological Properties of Alumina and Alumina-Graphite Coatings , Coatings — DOI: 10.3390/coatings13071165
- Recycling of Wind Turbine Blades into Microfiber Using Plasma Technology , Materials — DOI: 10.3390/ma16083089
- Tribological Properties of Cr2O3, Cr2O3–SiO2-TiO2 and Cr2O3–SiO2-TiO2-Graphite Coatings Deposited by Atmospheric Plasma Spraying , Coatings — DOI: 10.3390/coatings13020408
2022
- Influence of Plasma Torch Power on the Plasma Jet Properties and Microstructure of Alumina Coatings , Coatings — DOI: 10.3390/coatings12070934
- POSSIBILITY OF RECYCLING WIND TURBINE BLADES USING PLASMA TECHNOLOGY , WIT Transactions on Ecology and the Environment — DOI: 10.2495/WMEI220061
- Investigations of Working Characteristics of Transferred Arc Plasma Torch Volume Reactor , Applied Sciences (Switzerland) — DOI: 10.3390/app12052624
2021
- The Effect of Heat Treatment on the Microstructure and Phase Composition of Plasma Sprayed Al<sub>2</sub>O<sub>3</sub> and Al<sub>2</sub>O<sub>3</sub>-TiO<sub>2</sub> Coatings for Applications in Biomass Firing Plants , Coatings — DOI: 10.3390/coatings11111289
- Formation of graphite-copper/n-silicon schottky photovoltaic diodes using different plasma technologies , Energies — DOI: 10.3390/en14216896
- Influence of different plasma spraying methods on the physical properties of YSZ coatings , Surfaces and Interfaces — DOI: 10.1016/j.surfin.2021.101120
- Improvement of the tribological properties of alumina coatings by zirconia addition , Coatings — DOI: 10.3390/coatings11080991
2020
- Tribological properties of plasma sprayed alumina, alumina-titania and alumina-zirconia coatings , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.138.656
- Thermal And Chemical Resistance Of Plasma Sprayed Al2o3, Al2o3-Tio2 Coatings , ResearchSquare — DOI: 10.21203/rs.3.rs-18422
- The investigation of an electric arc in a plasma chemical reactor for hazardous waste treatment , Journal of Chemical Technology and Biotechnology — DOI: 10.1002/jctb.6045
2019
- The study of the thermal treatment on the surface microstructure and electrical conductivity of the copper/graphite composites , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.136.400
- TRIBOLOGICAL PROPERTIES OF ALUMINA-ZIRCONIA COMPOSITE COATINGS PREPARED BY PLASMA SPRAYING , Proceedings on Engineering Sciences — DOI: 10.24874/PES01.01.025
2018
- Microstructure and tribological properties of plasma sprayed alumina and alumina-graphite coatings , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2018.06.081
- The preparation and analysis of ceramic fibers with deposited catalytic particles by plasma technology , Journal of Physics: Conference Series — DOI: 10.1088/1742-6596/959/1/012008
2017
- Effect of powder type on structure and properties of carbon based coatings , Romanian Journal of Physics
2016
- Effect of torch power on the microstructure of plasma sprayed Al<sub>2</sub>O<sub>3</sub> coatings , Surface and Interface Analysis — DOI: 10.1002/sia.5902
- The research on plasma processes and development of plasma technologies in the Lithuanian energy institute,Plazminių procesų tyrimas ir technologijų kūrimas Lietuvos energetikos institute , Energetika — DOI: 10.6001/energetika.v62i3.3350
2015
- The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method , Journal of Electrostatics — DOI: 10.1016/j.elstat.2015.03.003
- Behaviour of dispersed ceramic particles in DC arc plasma jet during the spray deposition of coatings , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012380
- Formation of carbon composite coatings by plasma spraying , Vacuum — DOI: 10.1016/j.vacuum.2015.04.028
2014
- The employment of a high density plasma jet for the investigation of thermal protection materials , Physica Scripta — DOI: 10.1088/0031-8949/2014/T161/014069
2013
- Synthesis of catalytic fibers employing atmospheric pressure arc plasma technology , Digest of Technical Papers-IEEE International Pulsed Power Conference — DOI: 10.1109/PPC.2013.6627584
2011
- The influence of plasma spraying parameters on the microstructure and properties of ZRO<sub>2</sub>-8Y<sub>2</sub>O<sub>3</sub> coatings , BALTTRIB 2011 - 6th International Scientific Conference, Dedicated to 65th Anniversary of Faculty of Agricultural Engineering, Proceedings
- The influence of plasma spraying regime and initial substance injection location on the structure of deposited coatings , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2011.04.067
- High temperature ablation of composite material under plasma jet impact , Medziagotyra — DOI: 10.5755/j01.ms.17.4.781
2010
- Effect of outlet nozzle design on the morphology and microstructure of micro - And nanostructure fibre formed by means of plasma technology , 3rd International Conference - Radiation Interaction with Material and Its Use in Technologies 2010, Program and Materials, Interaction'2010
- Realization and analysis of inorganic metal oxide plasma melting and fibrillation process,neorganiniu metalu oksidu plazminio lydymo ir pluoštinimo proceso realizacija ir analize , Energetika
- Experimental investigation of inline tube bundle cooling with two-phase foam flow,Koridoriniu vamzdžiu pluoštu aušinimo dvifaziu putu srautu eksperimentinis tyrimas , Energetika
- Nanostructured bioceramic coatings obtained by plasma spray technique , European Cells and Materials
2009
- Evaluation of wear resistance of plasma sprayed ceramic coatings , Medziagotyra
- Microstructure analysis of fibrous material manufactured by plasma spray method , Medziagotyra
- Measurement and numerical simulation of two-phase plasma flow in plasma spray process , Lithuanian Journal of Physics — DOI: 10.3952/lithjphys.49104
- Microstructure and properties of plasma sprayed al-doped YSZ coatings , Lithuanian Journal of Physics — DOI: 10.3952/lithjphys.49108
2008
- Characterization of wear properties of plasma sprayed ceramic coatings , Medziagotyra
- Investigation of plasma coatings manufactured from synthesized zirconia , Medziagotyra
- Influence of plasma jet parameters on synthesis and properties of YSZ coatings , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Microstructure and electrical properties of doped with Al<sub>2</sub>O <sub>3</sub> YSZ thin films, produced by plasma spraying technique , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Measurement and numerical simulation of two-phase plasma flow in plasma spray process , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Application of plasma technology for nanofibre formation from oil refinery waste (zeolite),Plazminio metodo taikymas formuojant nanoplauša̧ iš naftos produktu̧ gamybos proceso atlieku̧ (ceolitu̧) , Energetika
2007
- Characterization of tribological properties of plasma sprayed ceramic coatings , BALTTRIB 2007 International Scientific Conference, Proceedings
2006
- Plazma treatment of hazardous waste,Plazminis i̧airiu̧ pavojingq atlieku̧ nukenksminimas , Energetika
- Preparation of insulating refractory materials by plasma spray technology , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v10.i3.20
2005
- Effect of alumina addition on the microstructure of plasma sprayed YSZ , Journal of the European Ceramic Society — DOI: 10.1016/j.jeurceramsoc.2005.03.027
2004
- Correlations between processing parameters and microstructure for YSZ films produced by plasma spray technique , Journal of the European Ceramic Society — DOI: 10.1016/S0955-2219(03)00389-3
- Waste and biomass treatment employing plasma technology , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v8.i2.110
1999
- Water vapour plasma torch for hazardous waste treatment , Annals of the New York Academy of Sciences — DOI: 10.1111/j.1749-6632.1999.tb08750.x
1976
- Velocity and temperature distribution in the entrance region of tube with high temperature air flow. , LIET. TSR MOKSLU A KAD. DARBAI, SER. B.
1974
- PLASMA HEAT TRANSFER DURING TURBULENT GAS FLOW IN THE ENTRANCE REGION OF A CIRCULAR TUBE. , American Society of Mechanical Engineers (Paper) — DOI: 10.2514/6.1974-718
Tarptautiniai projektai
Septintoji bendroji programa (7BP)
1
Baigtas
2011.06.01 - 2011.11.30
Pagrindinis 2011 m. „Tyrėjų nakties“ tikslas – mokslininkų ir jų darbo viešinimas, vienijant visuomenę ir mokslo darbuotojus, laužant esamus stereotipus apie tyrėjus, parodydant „įpraDaugiau
Interreg
1
Taršos kontrolė yra visų šalių tarptautinis prašymas ir strateginis Europos sąjungos tikslas. Tai atsispindi vis didėjančiame išmetamųjų teršalų normų suvaržyme, ypač Baltijos jūros rDaugiau
COST
1
Įvairių medžiagų burbuliukų ir lašelių sąveika yra labai reikšminga medžiagų praktiniame panaudojime, kadangi sutinkama daugelyje pramoninių procesų bei kasdieniniame gyvenime. PramonDaugiau
2
Baigtas
2004.03.30 - 2009.03.29
The main objective of the Action is to develop materials for improved wear resistance of artificial joints and novel low wearing designs. For this purpose, the biotribology of materiaDaugiau
3
Baigtas
2001.06.25 - 2006.06.24
Projektu siekiama padidinti žinias apie gamybos procesų poveikį aplinkai, siekiant sukurti ir įgyvendinti aplinką tausojančius procesus, sumažinti poveikį aplinkai ir priimti žiniomisDaugiau
4
Baigtas
1999.09.13 - 2005.07.06
The main objective of the COST Action 525 was to understand the role played by grain boundaries in controlling the manufacture, microstructure and properties of electronic ceramics. CDaugiau
EUREKA
1
Šiame Eureka projekte siūloma nauja plazminė technologija, rekonstruojant plazminius įrenginius ir realizuojant aukštos kokybės labai plono (iki 2 µm skersmens) mineralinio plaušo eksDaugiau
Kiti tarptautiniai projektai
1
Plazmos sukeltų efektų tyrimas efektyviose energetinėse atliekų perdirbimo technologijose išgaunant vandenilį Projekto ID (LMT): P-LUP-22-66 Projekto numeris LEI vidauDaugiau
Projektai Lietuvoje
LMT projektai
1
Baigtas
2017.12.20 - 2021.12.30
Lietuvos energetikos institutas įgyvendina projektą „Plazmocheminis reaktorius pavojingų atliekų apdorojimui: sukūrimas, gamyba, tyrimas ir pritaikymas Nr. 01.2.2-LMT-K-718-01-0069“ fDaugiau
Kiti projektai Lietuvoje
1
Baigtas
2008.04.21 - 2010.12.31
Šiam projektui vykdyti buvo suburtos penkios mokslo įstaigos – Vilniaus Gedimino technikos universitetas (VGTU), VGTU Termoizoliacijos institutas (VGTU-TI), Lietuvos energetikos instiDaugiau