Position:
Senior research associate
Room number:
135-LK
Phone number:
+37037401907
Email:
Publications
Book or monograph chapter
2018
Coleman Ch. E., Markelov V. A., Roth M., Makarevičius V. [LEI], He Z., Chakravartty J. K., Alvarez-Holston A. M., Ali L., Ramanathan L., Inozemtsev V..
Is Spent Nuclear Fuel Immune from Delayed Hydride Cracking during Dry Storage? An IAEA Coordinated Research Project
In: Zirconium in the nuclear industry: 18th international symposium. JAV: ASTM International, 2018, p. 1224-1249. ISSN 1050-7558 ISBN 978-0-8031-7641-6.
Scientific article
2022
Mohamed A., Yousef S., Tonkonogovas A. [LEI], Makarevičius V. [LEI], Stankevičius A. [LEI].
High performance of PES-GNs MMMs for gas separation and selectivity
In: Arabian Journal of Chemistry. Amsterdam: Elsevier, 2022, Vol. 15, Iss. 2, 103565, p. 1-12. ISSN 1878-5352.
2020
Yousef S., Subadra S. P., Griškevičius P., Varnagiris Š. [LEI], Milčius D. [LEI], Makarevičius V. [LEI].
Superhydrophilic functionalized graphene/fiberglass/epoxy laminates with high mechanical, impact and thermal performance and treated by plasma
In: Polymer Testing. Oxford: Elsevier, 2020, Vol. 90, 106701, p. 1-11. ISSN 0142-9418, eISSN 1973-2348.
Subadra S. P., Yousef S., Griškevičius P., Makarevičius V. [LEI].
High-performance fiberglass/epoxy reinforced by functionalized CNTs for vehicle applications with less fuel consumption and greenhouse gas emissions
In: Polymer Testing. Oxford: Elsevier, 2020, Vol. 86, 106480, p. 1-10. ISSN 0142-9418.
2019
Yousef S., Tatariants M., Tichonovas M., Makarevičius V. [LEI].
Sustainable technology for mass production of Ag nanoparticles and Al microparticles from damaged solar cell wafers
In: Waste Management. Elsevier, 2019, Vol. 98, p. 126-134. ISSN 0956-053X.
Yousef S., Tatariants M., Denafas J., Makarevičius V. [LEI], Lukošiūtė S. I. [LEI], Kruopienė J..
Sustainable industrial technology for recovery of Al nanocrystals, Si microparticles and Ag from solar cell wafer production waste
In: Solar Energy Materials and Solar Cells. Amsterdam, Netherlands: Elsevier, 2019, Vol. 191, p. 493-501. ISSN 0927-0248, eISSN 1879-3398.
Baltušnikas A. [LEI], Grybėnas A. [LEI], Kriūkienė R. [LEI], Lukošiūtė I. [LEI], Makarevičius V. [LEI].
Evolution of Crystallographic Structure of M23C6 Carbide Under Thermal Aging of P91 Steel
In: Journal of Materials Engineering and Performance. Springer, 2019, Vol. 28, No. 3, p. 1480-1490. ISSN 1059-9495.
2018
Tatariants M., Yousef S., Skapas M., Juškėnas R., Makarevičius V. [LEI], Lukošiūtė S. I. [LEI], Denafas G..
Industrial technology for mass production of SnO2 nanoparticles and PbO2 microcube/microcross structures from electronic waste
In: Journal of Cleaner Production. Oxford, England: Elsevier, 2018, Vol. 203, p. 498-510. ISSN 0959-6526.
Mumladze T., Yousef S., Tatariants M., Kriūkienė R. [LEI], Makarevičius V. [LEI], Lukošiūtė S. I. [LEI], Bendikienė R., Denafas G..
Sustainable approach to recycling of multilayer flexible packaging using switchable hydrophilicity solvents
In: Green Chemistry. Cambridge, England: rsc.li/green-chem, 2018, Vol. 20, p. 3604-3618. ISSN 1463-9262.
Yousef S., Mumladze T., Tatariants M., Kriūkienė R. [LEI], Makarevičius V. [LEI], Bendikienė R., Denafas G..
Cleaner and profitable industrial technology for full recovery of metallic and non-metallic fraction of waste pharmaceutical blisters using switchable h ydrophilicity solve nts
In: Journal of Cleaner Production. Oxford, England: Elsevier, 2018, Vol. 197, p. 379-392. ISSN 0959-6526.
Yousef S., Tatariants M., Makarevičius V. [LEI], Lukošiūtė S. I. [LEI], Bendikienė R., Denafas G..
A strategy for synthesis of copper nanoparticles from recovered metal of waste printed circuit boards
In: Journal of Cleaner Production. Oxfordas: Elsevier, 2018, Vol. 185, p. 653-664. ISSN 0959-6526.
Conference paper
2022
Skvorčinskienė R. [LEI], Urbonavičius M. [LEI], Kiminaitė I. [LEI], Maziukienė M., Vorotinskienė L. [LEI], Striūgas N. [LEI], Zakarauskas K. [LEI], Makarevičius V. [LEI], Poškaitė A., Bašinskas M..
Investigation of vapour film formation on nanolayer surfaces to reduce drag on marine vessels
In: Book of abstracts 17th Conference on sustainable development of energy, water and environment systems November 6-10 2022 Paphos, Cyprus. Zagreb: Faculty of Mechanical Engineering and Naval Architecture, 2022, p. 473-473. ISSN 2706-3690.
2020
Makarevičius V. [LEI], Baltušnikas A. [LEI], Lukošiūtė I. [LEI], Kriūkienė R. [LEI], Grybėnas A. [LEI].
Effect of thermal aging on structural changes in P91 and P5 heat resistant steels
In: Proceedings 29th International Conference on Metallurgy and Materials, Brno, Czech Republic, May 20 - 22, 2020. Brno: 2020, p. 567-572. SCOPUS . ISSN 2694-9296 ISBN 978-80-87294-97-0.
2016
Baltušnikas A. [LEI], Grybėnas A. [LEI], Kriūkienė R. [LEI], Makarevičius V. [LEI], Makštys A. [LEI].
Structural Characterization of Montmorillonite Intercalated with N-cetylpyridinium Chloride and Methyl Benzyl Di-octadecyl Ammonium Chloride
In: Book of abstracts of the 7th Baltic Conference on Silicate Materials BaltSilica 2016. 26-27 May. . Kaunas: Kauno technologijos universitetas, 2016, p. 1-1. ISSN 2243-6057.
Dundulis G. [LEI], Janulionis R. [LEI], Makarevičius V. [LEI], Grybėnas A. [LEI].
Fracture toughness numerical modelling of the martensitic chromium stell
In: 25th Anniversary International Conference on Metallurgy and Materials. Conference proceedings May 25th - 27th 2016 Hotel Voronez I, Brno, Czech Republic. Ostrava: Tanger Ltd, 2016, p. 592-597. ISBN 978-80-87294-67-3.
2015
Makarevičius V. [LEI], Baltušnikas A. [LEI], Lukošiūtė I. [LEI], Kriūkienė R. [LEI], Grybėnas A. [LEI].
Transformation kinetic M23C6 carbide lattice parameters in ferritic-martensitic P91 steel during thermal ageing
In: 24th International conference on Metallurgy and Materials. Conference proceedings June 3-5, 2015. Brno Czech Republic: TANGER, 2015, p. 773-778. ISBN 978-80-87294-62-8. .
International projects
IAEA
1
Components for nuclear reactors are made from zirconium alloys because they have a low thermal neutron capture cross-section, high resistance to corrosion in high temperature water anMore
2
Completed
01.03.2005 - 31.12.2009
The major goal of the this CRP is to develop experimental procedures for the reproducible measurements of delayed hydride cracking velocity of zirconium alloy cladding. In this procesMore
COST
1
COST Action MP0701 is concerned with polymers, which are reinforced with nano particles. Polymer Nanocomposites are blends of different polymer matrices with nanometre sized functionaMore