Publikacijos
https://orcid.org/0000-0003-2402-2223
2025
- NOx-Free Leaching Methods for Efficient Silver and Aluminium Recovery from Crystalline Silicon Solar Cells , Materials — DOI: 10.3390/ma18112668
- Thin-film composite membranes with tailored pore structures for enhanced gas separation performance , Journal of Environmental Chemical Engineering — DOI: 10.1016/j.jece.2025.115527
2024
- Enhanced gas separation performance for H2 purification using MIL-68(ln)-nh2/PES mixed-matrix membranes , Chemosphere — DOI: 10.1016/j.chemosphere.2024.142166
- Magnesium Hydride: Investigating Its Capability to Maintain Stable Vapor Film , Energies — DOI: 10.3390/en17030661
- Mechanical Properties of Polymers Recovered from Multilayer Food Packaging by Nitric Acid , Sustainability — DOI: 10.3390/su16052106
2023
- GNs/MOF-based mixed matrix membranes for gas separations , International Journal of Hydrogen Energy — DOI: 10.1016/j.ijhydene.2023.02.074
- Selection of DUPLEX steel welding process using low cycle fatigue test , METAL Conference Proeedings — DOI: 10.37904/metal.2023.4705
2022
- High performance of PES-GNs MMMs for gas separation and selectivity , Arabian Journal of Chemistry — DOI: 10.1016/j.arabjc.2021.103565
2020
- EFFECT OF THERMAL AGING ON STRUCTURAL CHANGES IN P91 AND P5 HEAT RESISTANT STEELS , METAL 2020 Conference Proeedings — DOI: 10.37904/metal.2020.3521
- Superhydrophilic functionalized graphene/fiberglass/epoxy laminates with high mechanical, impact and thermal performance and treated by plasma , Polymer Testing — DOI: 10.1016/j.polymertesting.2020.106701
- High-performance fiberglass/epoxy reinforced by functionalized CNTs for vehicle applications with less fuel consumption and greenhouse gas emissions , Polymer Testing — DOI: 10.1016/j.polymertesting.2020.106480
2019
- Sustainable technology for mass production of Ag nanoparticles and Al microparticles from damaged solar cell wafers , Waste Management — DOI: 10.1016/j.wasman.2019.08.019
- Sustainable industrial technology for recovery of Al nanocrystals, Si micro-particles and Ag from solar cell wafer production waste , Solar Energy Materials and Solar Cells — DOI: 10.1016/j.solmat.2018.12.008
- Evolution of Crystallographic Structure of M <sub>23</sub> C <sub>6</sub> Carbide Under Thermal Aging of P91 Steel , Journal of Materials Engineering and Performance — DOI: 10.1007/s11665-019-03935-1
2018
- A strategy for synthesis of copper nanoparticles from recovered metal of waste printed circuit boards , Journal of Cleaner Production — DOI: 10.1016/j.jclepro.2018.03.036
- Sustainable approach to recycling of multilayer flexible packaging using switchable hydrophilicity solvents , Green Chemistry — DOI: 10.1039/c8gc01062e
- Cleaner and profitable industrial technology for full recovery of metallic and non-metallic fraction of waste pharmaceutical blisters using switchable hydrophilicity solvents , Journal of Cleaner Production — DOI: 10.1016/j.jclepro.2018.06.154
- Is spent nuclear fuel immune from delayed hydride cracking during dry storage? An IAEA coordinated research project , ASTM Special Technical Publication — DOI: 10.1520/STP1S9720160048
- Industrial technology for mass production of SnO<sub>2</sub> nanoparticles and PbO<sub>2</sub> microcube/microcross structures from electronic waste , Journal of Cleaner Production — DOI: 10.1016/j.jclepro.2018.08.283
2017
- Numerical and experimental investigation of low cycle fatigue behaviour in P91 steel , Engineering Failure Analysis — DOI: 10.1016/j.engfailanal.2017.05.001
- Correlation between structural changes of M<sub>23</sub>C<sub>6</sub> carbide and mechanical behaviour of P91 steel after thermal aging , Materials Science and Engineering A — DOI: 10.1016/j.msea.2017.04.103
2016
- Energetikoje naudojamų plienų senėjimo vertinimas pagal struktūros pokyčius , Energetika — DOI: 10.6001/energetika.v62i3.3352
- Influence of Thermal Exposure on Structural Changes of M<sub>23</sub>C<sub>6</sub> Carbide in P91 Steel , Journal of Materials Engineering and Performance — DOI: 10.1007/s11665-016-2002-y
2014
- Analysis of processes in RBMK-1500 fuel rods during the operation, short and intermediate term storage , Kerntechnik — DOI: 10.3139/124.110397
- Stress-induced Hydride Reorientation and Cracking in Fuel Cladding Tube , Materials Science — DOI: 10.5755/j01.ms.20.4.5477
2013
- Dynamic analytical and experimental research of shock absorber to safeguard the nuclear fuel assemblies , Nuclear Engineering and Design — DOI: 10.1016/j.nucengdes.2013.03.014
2011
- The effect of microstructure on delayed hydride cracking behavior of zircaloy-4 fuel cladding - An International Atomic Energy Agency coordinated research program , ASTM Special Technical Publication
2010
- Investigation of resistance of nuclear fuel cladding to hydride cracking , Mechanika
- Effect of unloading on crack growth rate of Zr-2.5Nb tubes , Journal of Nuclear Materials — DOI: 10.1016/j.jnucmat.2010.07.031
- The effect of microstructure on delayed hydride cracking behavior of Zircaloy-4 fuel cladding-an international atomic energy agency coordinated research program , Journal of ASTM International — DOI: 10.1520/JAI103008
2009
- Static analytical and experimental research of shock absorber to safeguard the nuclear fuel assemblies , Nuclear Engineering and Design — DOI: 10.1016/j.nucengdes.2008.09.002
- Delayed hydride cracking in zircaloy fuel cladding - An IAEA coordinated research programme , Nuclear Engineering and Technology — DOI: 10.5516/NET.2009.41.2.171
2007
- Effect of test temperature and load ratio on hydride cracking rate of Zr-2.5Nb alloy , Mechanika
- Investigation of delayed hydride cracking in the Zr-2,5% Nb alloy , NATO Security through Science Series A: Chemistry and Biology — DOI: 10.1007/978-1-4020-5514-0_58
2006
Tarptautiniai projektai
Horizontas 2020
2015 m. pradžioje pasirašytas ES programos Horizontas 2020 projektas INCEFA-Plus, darbai pradėti 2015 m. liepos 1 dieną, jame dalyvauja LEI Medžiagų tyrimų ir bandymų bei BranduoliniųDaugiau
Septintoji bendroji programa (7BP)
Pluoštu armuotas cementas (FRC) yra tvirta, atspari ugniai ir korozijai medžiaga, plačiai naudojama statybos pramonėje. Kadangi Portlandcementas yra santykinai pigi medžiaga, ji puikiDaugiau
TATENA
Branduolinių reaktorių komponentai yra pagaminti iš cirkonio lydinių, kurie turi mažą terminio neutronų gaudymo skerspjūvį, aukštą atsparumą korozijai ir priimtiną mechaninį stiprumą.Daugiau
Pagrindinis šio CRP tikslas – sukurti vieningas cirkonio lydinių apvalkalų lėto hidridinio pleišėjimo greičio nustatymo eksperimentines procedūras ir metodus. Šiame procese buvo renkaDaugiau
COST
COST veikla MP0701 apjungia polimerų, kuriuose užpildai yra nano dalelės, tyrimus ir praktinį taikymą. Polimerų nanokompozitai (PNCM) yra įvairių polimerinių matricų mišiniai su nanomDaugiau
Projektai Lietuvoje
ES Struktūrinių fondų parama
Projekto „MTEP idėjos tikrinimas - Atliekų potencialas klimatui Neutralių Geopolimerų Sintezėje (ANGeoS)“ tikslas – patikrinti MTEP idėją bei pasirengti paraiškos teikimuiDaugiau
Lietuvos energetikos institutas kartu su partneriu „Astra LT“ AB vykdė projektą: „Autocisternos puspriekabės rėmo prototipo kūrimas iš LDX 2101 dvifazio nerūdijančiojo plieno“. AB Daugiau
UAB „Enerstena" kartu su partneriu Lietuvos energetikos institutu (LEI) ir Kauno technologijos universitetu (KTU) įgyvendina projektą „Daugiafunkcinės biomasės energetikos technolDaugiau