Pareigos:
vyresn. m. d.
Kab. nr.:
109-LK
Telefonas:
+37037401895
El. paštas:
Publikacijos
https://orcid.org/0000-0001-9299-6850
2026
- Optimization of Control for a Hybrid Renewable Energy System with Energy Storage Using Deep Reinforcement Learning Methods , Sustainability — DOI: 10.3390/su18115443
- Optimization of Hybrid Energy System Control Using MPC and MILP , Applied Sciences — DOI: 10.3390/app16083690
2025
- The Formation of Metal Hydrides on the Surface of Spherical Structures and the Numerical Evaluation of the Hydrogenation Process , Materials — DOI: 10.3390/ma18112595
- Neural network approaches for generation forecasting and conceptual design in hybrid renewable energy systems , International Journal of Electrical Power & Energy Systems — DOI: 10.1016/j.ijepes.2025.111241
- Development and Optimization of an Automated Industrial Wastewater Treatment System Using PLC and LSTM Neural Network , Applied Sciences — DOI: 10.3390/app15168990
- Optimization of an Automated Substrate Irrigation System Using the SAC Reinforcement Learning Agent , Applied Sciences — DOI: 10.3390/app152312715
- Application of RGB Color Analysis and Neural Networks for Preliminary Assessment of Wastewater Pollutant Concentration , Applied Sciences — DOI: 10.3390/app152312572
2024
- Development and Investigation of a Smart Impact Detector for Monitoring the Shipment Transport Process , Applied Sciences (Switzerland) — DOI: 10.3390/app14167102
- Influence of Graphite and Zirconia Addition on the Tribological Properties of Plasma-Sprayed Alumina Coatings , Coatings — DOI: 10.3390/coatings14080978
- Investigation of the Automatic Monitoring System of a Solar Power Plant with Flexible PV Modules , Applied Sciences (Switzerland) — DOI: 10.3390/app14209500
- An Investigation of Fly Ash and Slag Processing and Fiber Production Using Plasma Technology , Applied Sciences (Switzerland) — DOI: 10.3390/app14114801
- Investigation of an LED Strip Controller Based on a PWM Driver and a PIC Series Microcontroller , Applied Sciences (Switzerland) — DOI: 10.3390/app14104110
- The Influence of Voltage on Gliding Arc Discharge Characteristics, the Composition of Air Plasma, and the Properties of BG-11 Medium , Applied Sciences (Switzerland) — DOI: 10.3390/app14052135
- Fabrication of Thin TEG (Bi-Ni) Using Magnetron Sputtering Technology and Investigations , Coatings — DOI: 10.3390/coatings14030335
- Control of Vibratory Feeder Device Mechanical Frequency Using the Modification of the Sinusoidal Supply Voltage Signal , Journal of Low Power Electronics and Applications — DOI: 10.3390/jlpea14010015
2023
- Distribution of dynamic and energy parameters in high-temperature axisymmetrical air jet , Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer
- Recycling of Wind Turbine Blades into Microfiber Using Plasma Technology , Materials — DOI: 10.3390/ma16083089
- Effect of Spraying Power on the Tribological Properties of Alumina and Alumina-Graphite Coatings , Coatings — DOI: 10.3390/coatings13071165
- Research on the Energy Characteristics of a Transferred Arc Plasma-Chemical Reactor for Waste Treatment † , Applied Sciences (Switzerland) — DOI: 10.3390/app13074221
- Renewal of Lead Battery Electrodes Using a Plasma—Chemical Processing Method , Applied Sciences (Switzerland) — DOI: 10.3390/app13095463
- Electronic Life Cycle Monitoring System for Various Types of Lead Acid Batteries , Applied Sciences (Switzerland) — DOI: 10.3390/app13084746
- The Concept of a Hybrid Data Transmission Network with a Mobile Application Intended for Monitoring the Operating Parameters of a Solar Power Plant , Applied Sciences (Switzerland) — DOI: 10.3390/app13063545
2022
- Electronic System for the Remote Monitoring of Solar Power Plant Parameters and Environmental Conditions , Electronics (Switzerland) — DOI: 10.3390/electronics11091431
- Investigations of Working Characteristics of Transferred Arc Plasma Torch Volume Reactor , Applied Sciences (Switzerland) — DOI: 10.3390/app12052624
- Deposition and Application of Indium-Tin-Oxide Films for Defrosting Windscreens , Coatings — DOI: 10.3390/coatings12050670
- Intelligent Control of Mushroom Growing Conditions Using an Electronic System for Monitoring and Maintaining Environmental Parameters , Applied Sciences (Switzerland) — DOI: 10.3390/app122413040
- POSSIBILITY OF RECYCLING WIND TURBINE BLADES USING PLASMA TECHNOLOGY , WIT Transactions on Ecology and the Environment — DOI: 10.2495/WMEI220061
2021
- Formation of graphite-copper/n-silicon schottky photovoltaic diodes using different plasma technologies , Energies — DOI: 10.3390/en14216896
- Development of Renewable Energy in Lithuania: Experience, State and Trends , Environmental Research, Engineering and Management — DOI: 10.5755/j01.erem.77.4.29902
- Influence of different plasma spraying methods on the physical properties of YSZ coatings , Surfaces and Interfaces — DOI: 10.1016/j.surfin.2021.101120
- Improvement of the tribological properties of alumina coatings by zirconia addition , Coatings — DOI: 10.3390/coatings11080991
2020
- Comparative study of samarium-doped ceria nanopowders synthesized by various chemical synthesis routes , Ceramics International — DOI: 10.1016/j.ceramint.2020.06.221
2019
- The study of the thermal treatment on the surface microstructure and electrical conductivity of the copper/graphite composites , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.136.400
- Effect of copper content on the properties of graphite-copper composites formed using the plasma spray process , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2019.03.009
2017
- Effect of powder type on structure and properties of carbon based coatings , Romanian Journal of Physics
- Effect of carbon powder thermal activation on characteristics of supercapacitor electrodes , Journal of Electrostatics — DOI: 10.1016/j.elstat.2017.09.003
2015
- The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method , Journal of Electrostatics — DOI: 10.1016/j.elstat.2015.03.003
- Formation of carbon composite coatings by plasma spraying , Vacuum — DOI: 10.1016/j.vacuum.2015.04.028
- The investigation of solid slag obtained by neutralization of sewage sludge , Journal of the Air and Waste Management Association — DOI: 10.1080/10962247.2015.1064045
2014
- Diagnostic methods used for atmospheric pressure thermal arc plasma , Physica Scripta — DOI: 10.1088/0031-8949/2014/T161/014059
- Influence of the oxygen plasma treatment on carbon electrode and capacity of supercapacitors , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.125.1316
2012
- Investigation of electrical characteristics of the carbon electrodes,Badania elektrycznych charakterystyk elektrod węglowych , Przeglad Elektrotechniczny
- Carbon and Nickel Oxide/Carbon Composites as Electrodes for Supercapacitors , Journal of Materials Science and Technology — DOI: 10.1016/S1005-0302(12)60153-4
2011
- High temperature ablation of composite material under plasma jet impact , Medziagotyra — DOI: 10.5755/j01.ms.17.4.781
- Formation and characterization of carbon and nickel oxide/carbon composites for supercapacitors , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.119.253
- Enhanced capacitance of porous carbon electrodes through deposition of small amounts of NiO , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.120.66
2010
- A study of amorphous carbon as double-layer capacitors electrode materials , 3rd International Conference - Radiation Interaction with Material and Its Use in Technologies 2010, Program and Materials, Interaction'2010
- Atmospheric plasma carbon materials for supercapacitor electrodes , Przeglad Elektrotechniczny
- Influence of nickel oxide amount on electrical parameters and stability of supercapacitors , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v14.i3.40
2009
- Deposition of carbon electrodes for supercapacitors using atmospheric plasma torch , Medziagotyra
- Influence of plasma jet temperature on the synthesis and structure of YSZ coatings , Lithuanian Journal of Physics — DOI: 10.3952/lithjphys.49114
2008
- Influence of plasma jet parameters on synthesis and properties of YSZ coatings , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Atmosperic plasma torch deposition of carbon electrodes for supercapacitors , International Conference - Radiation Interaction with Material and its use in Technologies 2008
Tarptautiniai projektai
Interreg
1
Taršos kontrolė yra visų šalių tarptautinis prašymas ir strateginis Europos sąjungos tikslas. Tai atsispindi vis didėjančiame išmetamųjų teršalų normų suvaržyme, ypač Baltijos jūros rDaugiau
COST
1
Pagrindinis COST veiklos tikslas yra sukurti vieningą Europos šalių tinklą, skirtą vandenynuose dirbančių įrenginių ilgaamžiškumui didinti, kuriant naujos kartos tvarias, patikimas irDaugiau
2
Baigtas
2006.09.25 - 2010.09.24
Ši veikla susijusi su metalų oksidų dangų sintezės procesais ir jų paviršiaus bei vidinės struktūros cheminių/fizikinių savybių tyrimais. COST veikloje buvo sudarytos 4 darbo grupės, Daugiau
Projektai Lietuvoje
ES Struktūrinių fondų parama
LMT projektai
1
Projekto tikslas – sukurti ir patikrinti dirbtinio intelekto (DI) įrankius, pagrįstus neuroniniais tinklais, skirtus hibridinių atsinaujinančios energijos sistemų optimaliam projektavDaugiau
2
Baigtas
2022.05.01 - 2024.12.31
Pagrindinis projekto tikslas - sukurti naują technologiją, apjungiant impulsinio elektrinio lauko (PEF) ir plazmos apdorojimą, siekiant veiksmingai išgauti vertingus junginius iš jūroDaugiau
3
Baigtas
2017.12.20 - 2021.12.30
Lietuvos energetikos institutas įgyvendina projektą „Plazmocheminis reaktorius pavojingų atliekų apdorojimui: sukūrimas, gamyba, tyrimas ir pritaikymas Nr. 01.2.2-LMT-K-718-01-0069“ fDaugiau