Publikacijos
https://orcid.org/0000-0002-3034-2410
2025
- Investigation of In-Flight Alumina Particle Interaction with a Plasma Jet in a Thermal Plasma Reactor , Crystals — DOI: 10.3390/cryst15100851
2024
- Kavaliauskas Ž. [LEI], Baltušnikas A. [LEI], Milieška M. [LEI], Valinčius V. [LEI]. Fabrication of Thin TEG (Bi-Ni) Using Magnetron Sputtering Technology and Investigations In: Coatings. Basel: , MDPI, 2024, Vol. 14, Iss. 3, 335, p. 1-13. ISSN 2079-6412
- An Investigation of Fly Ash and Slag Processing and Fiber Production Using Plasma Technology , Applied Sciences — DOI: 10.3390/app14114801
2023
- Research on the Energy Characteristics of a Transferred Arc Plasma-Chemical Reactor for Waste Treatment , Applied Sciences — DOI: 10.3390/app13074221
- Recycling of Wind Turbine Blades into Microfiber Using Plasma Technology , Materials — DOI: 10.3390/ma16083089
2022
- Investigations of Working Characteristics of Transferred Arc Plasma Torch Volume Reactor , Applied Sciences (Switzerland) — DOI: 10.3390/app12052624
2021
- Formation of graphite-copper/n-silicon schottky photovoltaic diodes using different plasma technologies , Energies — DOI: 10.3390/en14216896
- Influence of different plasma spraying methods on the physical properties of YSZ coatings , Surfaces and Interfaces — DOI: 10.1016/j.surfin.2021.101120
2020
- The investigation of an electric arc in a plasma chemical reactor for hazardous waste treatment , Journal of Chemical Technology and Biotechnology — DOI: 10.1002/jctb.6045
2019
- The study of the thermal treatment on the surface microstructure and electrical conductivity of the copper/graphite composites , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.136.400
- Effect of copper content on the properties of graphite-copper composites formed using the plasma spray process , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2019.03.009
2018
- Investigation of warm gas clean-up of biofuel flue and producer gas using electrostatic precipitator , Energy — DOI: 10.1016/j.energy.2017.11.120
2017
- Investigation of the biofuel flue and producer gases cleaning efficiency using ESP , E3S Web of Conferences — DOI: 10.1051/e3sconf/20172200138
- Effect of carbon powder thermal activation on characteristics of supercapacitor electrodes , Journal of Electrostatics — DOI: 10.1016/j.elstat.2017.09.003
- Glycerol steam reforming for hydrogen and synthesis gas production , International Journal of Hydrogen Energy — DOI: 10.1016/j.ijhydene.2016.12.071
- Investigation of sewage sludge treatment using air plasma assisted gasification , Waste Management — DOI: 10.1016/j.wasman.2017.03.024
2016
- A cleaner production of synthesis gas from glycerol using thermal water steam plasma , Journal of Cleaner Production — DOI: 10.1016/j.jclepro.2015.11.024
- The research on plasma processes and development of plasma technologies in the Lithuanian energy institute,Plazminių procesų tyrimas ir technologijų kūrimas Lietuvos energetikos institute , Energetika — DOI: 10.6001/energetika.v62i3.3350
- Biomass conversion to hydrogen-rich synthesis fuels using water steam plasma , Comptes Rendus Chimie — DOI: 10.1016/j.crci.2015.12.002
- Filter media properties of mineral fibres produced by plasma spray , Environmental Technology (United Kingdom) — DOI: 10.1080/09593330.2015.1114028
2015
- The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method , Journal of Electrostatics — DOI: 10.1016/j.elstat.2015.03.003
- Behaviour of dispersed ceramic particles in DC arc plasma jet during the spray deposition of coatings , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012380
- Behaviour of dispersed ceramic particles in DC arc plasma jet during the spray deposition of coatings , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012743
- Water vapor plasma torch for synthesis gas production from organic waste , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012282
- The investigation of solid slag obtained by neutralization of sewage sludge , Journal of the Air and Waste Management Association — DOI: 10.1080/10962247.2015.1064045
- Water vapor plasma torch for synthesis gas production from organic waste , ICOPS/BEAMS 2014 - 41st IEEE International Conference on Plasma Science and the 20th International Conference on High-Power Particle Beams — DOI: 10.1109/PLASMA.2014.7012722
2014
- Plasma spray deposition and characterization of catalytic coatings for environmental application , Fresenius Environmental Bulletin
- Operational parameters of thermal water vapor plasma torch and diagnostics of generated plasma jet , Romanian Reports in Physics
- Production of synthesis gas from propane using thermal water vapor plasma , International Journal of Hydrogen Energy — DOI: 10.1016/j.ijhydene.2013.11.134
- Influence of the oxygen plasma treatment on carbon electrode and capacity of supercapacitors , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.125.1316
- Diagnostic methods used for atmospheric pressure thermal arc plasma , Physica Scripta — DOI: 10.1088/0031-8949/2014/T161/014059
2013
- Water vapour plasma generation for environmental purposes , Fresenius Environmental Bulletin
- The simultaneous synthesis of hydrogen-rich gas and oxidation of fine metal particles in water vapour plasma , Problems of Atomic Science and Technology
- Synthesis of catalytic fibers employing atmospheric pressure arc plasma technology , Digest of Technical Papers-IEEE International Pulsed Power Conference — DOI: 10.1109/PPC.2013.6627584
2012
- Investigation of electrical characteristics of the carbon electrodes,Badania elektrycznych charakterystyk elektrod węglowych , Przeglad Elektrotechniczny
- Carbon and Nickel Oxide/Carbon Composites as Electrodes for Supercapacitors , Journal of Materials Science and Technology — DOI: 10.1016/S1005-0302(12)60153-4
- Preparation and characterization of TiO <sub>2</sub>-based plasma-sprayed coatings for NO <sub>x</sub> abatement , Catalysis Today — DOI: 10.1016/j.cattod.2012.05.013
- Distribution of dynamic and thermal characteristics in a non-equilibrium plasma jet , Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer — DOI: 10.1615/ICHMT.2012.ProcSevIntSympTurbHeatTransfPal.1690
- Syngas production from hydrocarbon-containing gas in ambient of water vapor plasma , Catalysis Today — DOI: 10.1016/j.cattod.2012.05.027
2011
- Design and operating characteristics of water vapor plasma torch for environmentally friendly processes , 8th International Conference on Environmental Engineering, ICEE 2011
- Water vapor plasma technology for biomass conversion to synthetic gas , Catalysis Today — DOI: 10.1016/j.cattod.2010.12.029
- The influence of plasma spraying regime and initial substance injection location on the structure of deposited coatings , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2011.04.067
- High temperature ablation of composite material under plasma jet impact , Medziagotyra — DOI: 10.5755/j01.ms.17.4.781
- Deposition and structure characterization of carbon films prepared at atmospheric pressure by plasma jet , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2010.12.041
- Experimental study of catalytic CO oxidation over CuO/Al<sub>2</sub>O <sub>3</sub> deposited on metal sheets , Catalysis Today — DOI: 10.1016/j.cattod.2011.02.023
2010
- Water vapor plasma generation under athmospheric pressure for the treatment of waste and biomass , 3rd International Conference - Radiation Interaction with Material and Its Use in Technologies 2010, Program and Materials, Interaction'2010
- Effect of outlet nozzle design on the morphology and microstructure of micro - And nanostructure fibre formed by means of plasma technology , 3rd International Conference - Radiation Interaction with Material and Its Use in Technologies 2010, Program and Materials, Interaction'2010
- Realization and analysis of inorganic metal oxide plasma melting and fibrillation process,neorganiniu metalu oksidu plazminio lydymo ir pluoštinimo proceso realizacija ir analize , Energetika
- Graphite-like and polymer-like carbon films formation from Ar/C <sub>2</sub>H<sub>2</sub> at atmospheric pressure by plasma jet , Przeglad Elektrotechniczny
2009
- Heat transfer in the arc discharge channel , Heat Transfer Research — DOI: 10.1615/HeatTransRes.v40.i5.40
- Peculiarities of gas dynamics and heat transfer in catalytic monolithic reactor containing CuO for co oxidation,Dujų dinamikos ir šilumos pernašos kataliziniame monolitiniame reaktoriuje su CuO katalizatoriumi ypatumai oksiduojant co , Energetika
- Influence of Ar/C<sub>2</sub>H<sub>2</sub> ratio on the structure of hydrogenated carbon films , Journal of Non-Crystalline Solids — DOI: 10.1016/j.jnoncrysol.2009.05.009
- Measurement and numerical simulation of two-phase plasma flow in plasma spray process , Lithuanian Journal of Physics — DOI: 10.3952/lithjphys.49104
- Influence of torch power and Ar/C<sub>2</sub>H<sub>2</sub> ratio on structure of amorphous carbon films , Lithuanian Journal of Physics — DOI: 10.3952/lithjphys.49107
- Influence of process parameters on structure of carbon coatings deposited at atmospheric pressure , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v13.i2.20
2008
- The synthesis of fine particles during plasma spray pyrolysis process , Problems of Atomic Science and Technology
- Measurement and numerical simulation of two-phase plasma flow in plasma spray process , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Influence of torch power and Ar/C<sub>2</sub>H<sub>2</sub> ratio on structure of a-C:H films , International Conference - Radiation Interaction with Material and its use in Technologies 2008
- Heat transfer in a plasma jet reactor for melting and melt fibrillation of hard ceramics , Heat Transfer Research — DOI: 10.1615/HeatTransRes.v39.i7.50
- Deposition of amorphous hydrogenated carbon coatings by plasma jet , Acta Physica Polonica A — DOI: 10.12693/APhysPolA.113.1063
2007
- Structure of carbon films deposited at atmospheric pressure , BALTTRIB 2007 International Scientific Conference, Proceedings
- Synthesis of carbon coatings employing a plasma torch from an argon-acetylene gas mixture at reduced pressure , Vacuum — DOI: 10.1016/j.vacuum.2007.01.028
2006
- Preparation of insulating refractory materials by plasma spray technology , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v10.i3.20
- Plazma treatment of hazardous waste,Plazminis i̧airiu̧ pavojingq atlieku̧ nukenksminimas , Energetika
- Investigation of single-chamber linear plasma torch characteristics while heating monatomic and diatomic gases,Vienkamerinio linijinio plazmos generatoriaus, kaitinančio vienatomes ir dviatomes dujas, charakteristiku̧ tyrimas , Energetika
- A new method for immunosensor preparation: Atmospheric plasma torch , Surface and Coatings Technology — DOI: 10.1016/j.surfcoat.2006.04.032
2004
- Waste and biomass treatment employing plasma technology , High Temperature Material Processes — DOI: 10.1615/HighTempMatProc.v8.i2.110
- Electric and thermal characteristics of the linear, sectional dc plasma generator , Plasma Sources Science and Technology — DOI: 10.1088/0963-0252/13/2/002
2003
- Study of high temperature thermal boundary conditions on active surfaces of the cylinder shaped ultrasonic transducers , International Journal of Heat and Mass Transfer — DOI: 10.1016/S0017-9310(03)00230-8
- Preparation of catalytic coatings for heterogeneous catalysts employing atmospheric pressure non-equilibrium plasma , Surface and Coatings Technology — DOI: 10.1016/S0257-8972(03)00617-0
2002
- Nitriding of an austenitic stainless steel in plasma torch at atmospheric pressure , Surface and Coatings Technology — DOI: 10.1016/S0257-8972(02)00091-9
2000
- Catalytic behavior of plasma-sprayed Al-Al<sub>2</sub>O<sub>3</sub> coatings doped with metal oxides , Surface and Coatings Technology — DOI: 10.1016/S0257-8972(99)00584-8
- Plasma spray deposition of Al-Al<sub>2</sub>O<sub>3</sub> coatings doped with metal oxides: Catalytic applications , Surface and Coatings Technology — DOI: 10.1016/S0257-8972(99)00520-4
Metai nenurodyti
- Efficiency of Plasma Gasification Technologies for Hazardous Waste Treatment
Tarptautiniai projektai
Interreg
Taršos kontrolė yra visų šalių tarptautinis prašymas ir strateginis Europos sąjungos tikslas. Tai atsispindi vis didėjančiame išmetamųjų teršalų normų suvaržyme, ypač Baltijos jūros rDaugiau
COST
Plazmos – skysčio sistemos gali sukurti labai nesubalansuotą aplinką. Plazmos – skysčio sąveika yra puiki galimybė kurti naujas chemijos ir su ja susijusias technologijas. Šio projektDaugiau
Pagrindinis COST veiklos tikslas yra utilizuoti biomasę ir generuoti sintetines dujas, kurios būtų panaudojamos kaip efektyvus kuras. Veiklos metu buvo skatinamas mokslininkų bendradaDaugiau
Ši veikla susijusi su metalų oksidų dangų sintezės procesais ir jų paviršiaus bei vidinės struktūros cheminių/fizikinių savybių tyrimais. COST veikloje buvo sudarytos 4 darbo grupės, Daugiau
Projektu siekiama padidinti žinias apie gamybos procesų poveikį aplinkai, siekiant sukurti ir įgyvendinti aplinką tausojančius procesus, sumažinti poveikį aplinkai ir priimti žiniomisDaugiau
Projekto metu buvo tiriamas plazmos polimerizacijos procesas, atsižvelgiant į norimas fizines ir chemines gautų plazmos polimerų savybes, ypatingą dėmesį skiriant plazmos polimerų senDaugiau
EUREKA
Šiame Eureka projekte siūloma nauja plazminė technologija, rekonstruojant plazminius įrenginius ir realizuojant aukštos kokybės labai plono (iki 2 µm skersmens) mineralinio plaušo eksDaugiau
Kiti tarptautiniai projektai
Plazmos sukeltų efektų tyrimas efektyviose energetinėse atliekų perdirbimo technologijose išgaunant vandenilį Projekto ID (LMT): P-LUP-22-66 Projekto numeris LEI vidauDaugiau
Projektai Lietuvoje
ES Struktūrinių fondų parama
Registracijos Nr. BPD2004-ESF-2.5.0-03-05/0029 Pagal Lietuvos 2004–2006 metų bendrojo programavimo dokumento 2 prioriteto „Žmogiškųjų išteklių plėtra“ 2.5 priemonę „Žmogiškųjų išteDaugiau
LMT projektai
Lietuvos energetikos institutas įgyvendina projektą „Plazmocheminis reaktorius pavojingų atliekų apdorojimui: sukūrimas, gamyba, tyrimas ir pritaikymas Nr. 01.2.2-LMT-K-718-01-0069“ fDaugiau